How to Replace the Smart Dial

Looking to replace certain parts of your Hey abby grow box for an exciting renovation?

Let's get started and learn how to replace the smart dial in this article.

Smart Dial Replacement Instruction

1. Turn the power off, and open the front door of the grow box;

2. Remove the 6 screws holding the top panel on;

3. Remove the top panel, from the back of the box- lift upward;

4.   Locate the terminal connector where the dial plugs into the board;

5. Carefully flip open the black hinge style cover, that hold the wire in the connector;

6. Remove the wire from the connector, pull outward;

7. Follow the black wire to where it meets the dial. You will see the dial is connected to the box with 3 screws. Remove these screws and pull the old dial off;

8. You can now connect and replace the old dial with the new one. Once you have the wire connected, make sure to close the hinge cover to secure the wire.

*Disclaimer: These part replacement instructions pertain exclusively to original Hey abby parts that we've directly sent to you under the Hey abby warranty. Our warranty program does not cover any unauthorized third-party components.